MPSC Engineering services Mains admit card 2018, ESE Mains exam date, hall ticket download

MPSC Engineering services Mains admit card 2018, MPSC Engineering services Assistant Engineer Mains admit card 2018, MPSC Engineering services AE, AEE Mains hall ticket 2018 download.

Candidates hope you have applied for Madhya Pradesh Selection Commission Engineering services Mains written the examination, scheduled to be conducted on 27th December 2018. The MPSC Engineering services Mains notification was released on 12th October 2018, for the candidates who have qualified the preliminary test and now will have to apply for next Main written test. Being competitive contenders, most of you searching for MPSC Engineering services Mains admit card 2018 have enrolled for the Mains exam until 25th October 2018 and now here you all will be intimated about the next thing towards your exam i.e.,  MPSC Engineering services Mains admit card 2018.

MPSC Engineering services Mains admit card 2017
MPSC Engineering services Mains admit card 2017

 MPSC Engineering services Mains admit card 2018

Maharashtra Public Service Commission is a Government body with its headquarters in Maharashtra established for serving various civil services in the state. MPSC owns the responsibility to conduct various examinations prior to the vacancies introduced by MPSC. Likewise, in its recent recruitment notification MPSC has invited various eligible candidates from the state pursued a B.Tech degree in different streams of Engineering for 199 posts of Assistant Engineer and Assistant Executive Engineer.

This was a wonderful opportunity for engineers of the state, hence the commission got an expected huge response from a huge number of Application forms. Soon, the selection process has started with first conducting MPSC Engineering services preliminary examination held successfully on 09/07/2018. contenders qualifying this written preliminary examination now must be navigating for MPSC Engineering services Mains admit card 2018 which the department has uploaded and is available here with direct links.

MPSC Engineering services Mains hall ticket 2018 download

Candidates congratulations if you have qualified MPSC Engineering services first round of selection that is Preliminary examination held in various centers in the state. As the department has released the result and so the list of candidates selected for MPSC ESE Mains examination 2018, next step is to make sure that you at first shall be informed about the release of MPSC Engineering services Mains hall ticket 2018, that will be published on official website of MPSC a week or 10 days before examination.

Your MPSC Mains ESE admit card will be tentatively issued to every selected candidate on the first or second week of December 2018. As soon as the authority will update their web portal with hall tickets, at instant direct links to download call letters will be available here.

MPSC Engineering services AE, AEE Mains hall ticket 2018 download

Applicants can get their MPSC Engineering services AE, AEE Mains hall ticket 2018 from the links given below, only candidates qualifying prelims are allowed to access these call letters. To pursue the desirable jobs of Engineers you needed to clear Mains examination as well, and to set the Mains written test, first you need to download your hall ticket. Don’t wait for too much and go through the article to access your hall ticket very first.

You may check:-

Reasoning question bank for SSC CGL 2018

MPSC Engineering services Mains admit card 2018 Overview

 Name of the Commission  Madhya Pradesh Public Service Commission
 Advt. notification  67/2018
 Name of the Post  Assistant Engineer, Assistant Executive Engineer.
 Number of the Post  199
 Job type  Engineer jobs
 Job location  Maharashtra
 Pay Scale
  • Grade A: Rs. 15,600/- to Rs. 39,100/- + Grade Pay Rs. 5,400/-.
  • Grade B: Rs. 9,300/- to Rs. 34,800/- + Grade Pay Rs. 4,400/-.
 Starting date to apply for MPSC Mains  11.10.2018.
 Last date to apply for MPSC Mains exam 2018  25th October 2018.
 Date of MPSC Engineering services Mains exam 2018  27.12.2018.
 MPSC Engineering services mains admit card 2018 release  Updated here
 Official website  mahampsc.mahaonline.gov.in

MPSC Engineering services Mains Exam date 2018

The MPSC Engineering Services Mains examination is on its way and candidates are searching for the answers running in their mind, like when will MPSC Engineering services Mains exam will be held? When did the call letters will get revealed? If so, then you have reached the right place, the officials have already declared the dates to conduct Mains written examination and then followed by Personal Interview. The authority has set all arrangement of exam for this day 17-12-2018 as for want to fill several vacancies in future on the basis of the main exam. Now, have a look at the MPSC Engineering services Mains exam pattern and syllabus to give your preparation a final touch.

JK Police constable test result 2018 check here

MPSC Engineering services Mains exam pattern 2018 MPSC ESE Civil test pattern download

Here we have updated the exam pattern of both preliminary and Mains test to bring out a better understanding of your coming to be paper. The preliminary you have already taken and the Mains is soon going to be taken, so the Mains written examination will contain two paper,

Paper 1 and

Paper 2.

Both the papers will be in English language and will consist of 200 questions worth making 200 marks. The questions will be asked from related subjects. JNVU Result 2018

The time duration for Mains examination given will be 2 hours.

Exam Type Subject No of Question Marks Duration
Objective Marathi 10 10 1 Hour 30 Minutes
English 10 10
General Studies 10 10
Engineering Aptitude Test 60 60

Maharashtra Engineering Service AE, AEE Mains test Pattern 2018

Exam Type Subject Paper No, of Question Marks Duration
Objective Civil Engineering Paper-I 200 200
Paper-II 200 200

 MPSC Civil Engineering exam best preparation books 2018

If you want to practice for MPSC Civil Engineering Services Mains examination, then we suggest you go through these best preparation books easily available in markets. If it worth it, you will grab these books today.

 Questions to practice for MPSC Engineering services Mains 2018

Ques 1. Differentiate between Cohesion and Adhesion giving one example each?

Ques 2. Bernaulli’s theorem and its limitations?

Ques 3. Explain the significance of Reynold’s Number in pipe flow?

Ques 4. A spillway model is to be built to a geometrically similar scale of 1/50 across a flume of 60 cm width. The prototype is 15 meters high and maximum head on spillway is expected to be 7.5 m. If the flow over a model at a particular head is 12 liters per second, what flow per meter length of the prototype is
expected ?

Ques 5. List the criteria on which turbines are classified. Also differentiate between reaction 10 and impulse turbine?

Ques 6. Why does extra widening need to be provided on a horizontal curve ?

Ques 7. Discuss the classification of subgrade soils as per revised PRA system of soil 10 classification?

Ques 8. What is super elevation ? Why is it required to provide on horizontal curve?

Ques 9. Derive the expression for equilibrium super elevation?

Ques 10. Draw a neat sketch and explain Tube settler. What are the advantages of tube 10 settler over plain sedimentation.
Design tube settler module of square cross section for following data
(i) Average output required from tube settler = 250 m3/hr.
(ii) Loss of water in desludging = 2% of output required.
(iii) Cross section of square tubes = 50 mm x 50 mm
(iv) Length of tubes = 1 m
(v) Angle of inclination of tubes = 60%
(b) (i) Explain the following sewer appurtenances with a neat sketch
(A) Inverted Syphon
(B) Drop Manhole

JNTU Solved question papers here

MPSC Civil Engineering Mains Paper 1 syllabus 2018

                                              Topics
 Building Constructions & material:

Properties of wet and hardened concrete, tests on concrete, factors affecting strength of concrete, water-cement ratio, aggregate-cement ratio, mix design, additives, design of form work, types of formwork. Stones, bricks, cements, lime, mortar, timber, plastic, concrete, steel, paints and varnishes. Principles of building planning and design, integrated approach, building byelaws, building services such as vertical transportation, water supply sanitation, thermal ventilation, lighting, acoustics, fire protection, electrical fittings. Foundations, stones, brick and block masonry, steel and reinforced cement concrete structures, floors, doors and windows, roofs, finishing works, water proofing.

 Strength of Material;

Stresses, strains, principal stresses, bending moments, shear forces and torsion theory, bending theory of beam, deflection of beam, theories of buckling of columns.

 Theory of Structures:

Analysis of beams, frames and trusses, slope deflection method,
moment distribution method.

 Structural Analysis:

Analysis of arches and suspension cables, influence lines, stiffness and flexibility matrix methods.

 Steel Structures:

Design of bolted and welded connections, columns, footings, trusses, steel beams, plate girders.

 Design of reinforced concrete structures (Working stress and limit state):

Design of slab,beams, columns, footing. retaining walls, tanks, building frames, staircases.

 Prestressed Concrete:

Principles of pre-stressing, materials used and their properties,
permissible stresses as per I.S. codes, systems of pre-stressing, losses in pre-stress, design of pre-tensioned and post-tensioned beams- simply supported, rectangular and T- beams, cable
profile, end block design, bridge girder.

 Construction Planning and Management: Elements of scientific management, elements of material management, safety engineering, network analysis, construction equipment, site layout, quality control.
Computer-aided analysis and design of structures, application of computer programming to structures. numerical methods such as-
i. Finding area by Simpson’s rule, trapezoidal rule;ii. Finding root of an equation by a) Newton-Raphson techniques
iii. b) Bisection methodiv. Solution of simultaneous equations by a) Gauss elimination method, b) Gauss-
Jordan method, c) Iteration method.

 MPSC Civil Services Mains Paper 2 syllabus 2018

 Surveying:

Classification of surveys, measurement of distances-direct and indirect methods,optical and electronic devices, prismatic compass, local attraction; plane table surveying, levelling, calculations of volumes, contours, theodolite, theodolite traversing, omitted measurements, trigonometric leveling, tacheometry, curves, photogrammetry, geodetic surveying, hydrographic surveying.

 Estimating, Costing and Valuation:

Specification, estimation, costing, tenders and contracts, rate analysis, valuation

 Geotechnical Engineering: Engineering: Geotechnical properties, stresses in soil, shear resistance, compaction, consolidation and earth pressure, stability of slopes, bearing capacity, settlements,shallow and deep foundations, cofferdams, ground water control.
 Fuild Mechanics:

Properties of fluids, fluid statics and buoyancy, kinematics and dynamics, flow measurement, flow in open channel, flow in closed conduits, dimensional and model
analysis, losses in pipe flow, siphon,

 Fluid Machines:

Machines: Hydraulic turbines, centrifugal pumps, reciprocating pumps, power house, classification and layout.

 Engineering Hydrology:

Hydrological cycle, precipitation, evaporation, infiltration, runoff,hydrographs, reservoir planning & sediment control, floods, flood routing, ground water.

 Irrigation Engineering:

Water requirement of crops, methods of irrigation, lift irrigation,water logging, dams, spillways, energy dissipation, diversion head works, canal and canal structures, cross drainage works, river training works.

 Highway Engineering:

Planning of highway systems, alignment and geometric design,
horizontal and vertical curves, grade separation, materials and different surfaces and maintenance, rigid and flexible pavement, traffic engineering.

 Bridge Engineering:

Selection of site, types of bridges, discharge, waterway, spans, afflux, scour, standards, specifications, loads and forces, erection of superstructure, strengthening.

 Tunnelling:

Open cuts, surveys, criteria for selection of size and shapes, driving in soft and hard grounds, mucking, dust control, ventilation, lighting and drainage, special methods of
tunnelling.

 Environmental Engineering
 Water Supply Engineering: Sources of supply, design of intakes, estimation of demand, water quality standards, primary and secondary treatment, maintenance of treatment units,
conveyance and distribution of treated water, rural water supply.

 How to download MPSC Engineering services Mains admit card 2018

  1. The first step is to log in to the official website of Maharashtra Public Service Commission i.e., www.mpsc.gov.in.
  2. Then on the home page, navigate for MPSC Engineering services mains admit card link. Then click on the link once found.
  3. Now, enter the registration number, date of birth or password to download the MPSC ES Hall ticket 2018.
  4. Next, click on submit button.
  5. Now, your MPSC Engineering Services Prelims Admit card will display on the screen.
  6. Download the hall ticket.
  7. At last, take the print out of Maharashtra Engineering Services Hall ticket and carry it during the exam.

This is all guys for MPSC Mains admit card 2018, let us know your queries in the comment section below and stay tuned for more fresh updates on this

MPSC Engineering services Mains admit card 2018, ESE Mains exam date, hall ticket download
Rate this post

1 thought on “MPSC Engineering services Mains admit card 2018, ESE Mains exam date, hall ticket download

Leave a Comment